Let's Chat!

Enter Block content here...


Lorem ipsum dolor sit amet, consectetur adipiscing elit. Etiam pharetra, tellus sit amet congue vulputate, nisi erat iaculis nibh, vitae feugiat sapien ante eget mauris.

Sunday, August 12, 2012

Free Blue

8:47 PM | Posted by
Blue
This tut assume your have a working knowledge of PSP.
Kit: LC Free Blue, you can download here
Tube: Barbara Jensen you can purchase her tubes here.www.eroticartgallery.com
Mask:WSL Mask 19 you can find it  here.
Template: by Dezignz By Ali template 108 you can find here
Fonts: Serge Print, comes in psp.
Shadow: 2,2, 50, 5
PSP Filters used:NONE .
sa-f-df-nl= Select All, Float, Defloat, New Raster Layer.
sa-f-df= Select All, Float, Defloat.
sn=selelct none
c/p= copy & paste
Let's begin & save often. Please refer to the finished tag for placement of elements, tubes etc..
Open your tube, masks, and template. Duplicate the template and close the orginal.
In template delete the first 3 layers, we'll start at the bottom of the layers.
HIDE template layers as you finish a step.
Barbara has some wonderful coloured layers in this tube I chose all the  blue items.
Select the bottom layer and add a new layer flood fill this with white.
Add a new layer again, open paper 02, resize to 800x800 pixels, copy and paste as a new layer, apply the mask and merge group.
Go to Shape 1 layer, sa-f-df-nl, resize Paper 01 to 800x800 pixels c/p into selelctions in your template, sn, add a drop shadow.
Selelct Shape 03 layer, sa-f-df-nl, open Paper05, resize to 800x800 pixels c/p into selections in your template,
sn, add a drop shadow.
Select Shape 2 layer, sa-f-df-nl, open paper 04, resize to 800x800 pixels c/p into selections in your template,
sn, add a drop shadow.

Select shape 4 copy layer and merge down, sa-f-df, open paper 2 and c/p as a new layer, selections invert and delete.
Adjust, add noise using these settings: Uniform and Monochrome checked setting 75, click OK.

Let's add the tube.
Select shape 3 again, sa-f-df, c/p your tube as a new layer, selections invert and hit delete, move this layer to just below
the Shape 2 layer, lower the opacity to about 68%.
Select the top layer in your pallet, C/P your again as a new layer,resize your tube by 80% sharpen once and position.
Now for the elements, I used the following:
LC-free Blue 11, resize 35% and then 50%, c/p as new layer move below shape 3 layer.
LC-free Blue 1, resize 35% sharpen once and move to above your mask layer, duplicate and mirror.
LC-free Blue 14, resize 35@ twice, and then 80%, duplicate image mirror.
For the gloves to be on the outside of the flower you can c/p them on their own resize 80% and position.
All done.
Add your text and of course your copy right info.
Thanks for trying my tut.


8:01 PM | Posted by
Slow N Easy
This tut assume your have a working knowledge of PSP.
Kit: Slow N Easy by Dee's Sign Depot, you can download here
Tube: FEATHERS by Ismael Rac/ www.xerac.com
Mask:Gemsmasks1191 you find here  http://Gemstagginscraps.blogspot.com
Template: Missy_tagtemplate410 you can find here http://divineintentionz.blogspot.ca/
Fonts: MsMadi (#1b788d)
Shadow: 2,2, 50, 5
PSP Filters used:NONE .
sa-f-df-nl= Select All, Float, Defloat, New Raster Layer.
sa-f-df= Select All, Float, Defloat.
sn=selelct none
c/p= copy & paste
Let's begin & save often. Please refer to the finished tag for placement of elements, tubes etc..
Open your tube, masks, and template. Duplicate the template and close the orginal.
In template delete the following: "by missy" and the "stars", we'll start at the bottom of the layers.
HIDE template layers as you finish a step.
Let's begin, go to Image canvas size and increase the size to 900x550, unhide the bottom layer and flood fill with white.
Click on rectangle 1 layer. Add a new layer sa-f-df, c/p DD-SNE Paper5 Into Selections, sn.
Apply mask 161, merge group layers. Duplicate mask layer and Image Mirror, Layers Merge down.
Hi lite Rectangl 1 layer, sa-f-df-nl, c/p DD-SNE Paper2 Into Selections, sn add a drop shadow.
Repeat this step for rectangle 2 layer.
Select "rounded egde rec' layer, sa-f-df-nl, /cp DD-SNE Paper5 Into Selections, sn, add a drop shadow.
Repeat for "rounded edge rec 2" layer.
Select the "thin rectangle" layer, sa-f-df, c/p DD-SNE Paper 2 as new layer, move the paper slightly to the left, selections invert & delete.
Select the "frame back" layer, sa-f-df, c/p DD-SNE Paper3 as new layer, you will have to move the paper slightly to the left so that
the paper is within the selelction area, selections invert and delete.
Let's add the tube now.
Select the "frame" layer and using your magic wand tool click inside the left frame, selections, modify, expand by 3.
c/p the close of the the tube, position the tube, invert and delete, sn.
Move this tube layer to below the "frame" layer.
Repeat this step for the rest of the frame, I mirrored one of the tubes so they aren't all looking in the same direction.
Merge the 3 tube layers as 1, lower the opacity to 58.
c/p the full size tube as a new layer move this to the top and position.
Now for the elements, I used the following:
DD-SNE-element 2, c/p, move to the right and up slightly, duplicate & mirror the move this layer to the right just under the original
element 2 layer, merge these 2 layers together and move to just above your mask layer in your layers pallet, duplicate and Image Mirror.
DD-SNE element 10, c/p as new layer and position, duplicate this layer and position, merge down, move to just above mask layer.
DD-SNE element 12, c/p as new layer and positon, move this layer to just below the "frame back" layer.
DD-SNE element 18, c/p as new layer resize 40%.
DD-SNE element 19  c/p as new layer resize 20%. Duplicate layer 3 times and position.
DD-SNE element 24 c/p as a new layer, image mirror, move to the left.
DD-SNE element  6 c/p resize 20%
DD-SNE element  5 c/p resize 20%
DD-SNE WA 2, resize 40%
Hide the white background layer and merge visible. Resize all layers 80% sharpen once.
Add your copy right and text.
All done.

Saturday, August 11, 2012

Naughty Hottie

6:32 PM | Posted by
Tut name: Naughty Hottie
Tube name and store: Elias Chatzoudis, Leather Beauty, availabe here
Scrap kit: Naughty Hottie by Sarah's Tags N Things your can purchase it here.
Thank you Sarah for letting me use this very cute kit!! Visit her blog here.
Templates: Paint Shop Pro Goddess by Cakes, http://crazycakesscraps.blogspot.com
Masks: Mask 18 by Bev, download at http://horseplayspasture.blogspot.com
Font: Chrome Yellow NF
This turorial is the sole property of  JTsDesigns.
Any similarities other tuts out the on the web is purly coincidental.
Add drop shadow using your favourite settings.
This tut uses no outside filters/plugins.
S=Selections, SA=Select All, F=Float, DF=Defloat, SN=select none, c/p=copy & paste.
First let's open all our supplies/templates/masks and tube, I like to have everything open and
ready. Duplicate the template and close the original.
You can refer to my finished tag for placement of elements.
Lets begin.
In the template delete the first 3 layers. Resize all layers 80%.
Select the bottom layer and add a new layer, flood fill white you can delete later, move to the bottom.
Add a new layer, S, SA. c/p ST-Paper4 into selections, SN.
Apply the mask layer, merge group.
Select layer 10, S, SA, F, DF, c/p ST-Paper1 as a new layer, selections invert and delete, repeat this step for layer 4 in the template.
Delete layer 10 & 4, add a drop shadow to both new layers.
Select layer 9, S, SA, F, DF, c/p ST-Paper4 as a new layer, move the paper to the right, selections invert and delete, SN.
Delete layer 9, add drop shadow. Repaet this step for layer 8.
Select layer 7, S, SA, F, DF, add a new layer, c/p ST-Paper10 Into Selections, move the paper to the left, selections invert and delete, SN. Add a drop shadow. Repeat this step on layer 3. delete layers 7 & 3.
From the elements c/p ST-City as a new layer, add a drop shadow.
Select layer 6, S, SA, F, DF, c/p ST-Paper3 as a new layer, selections invert and delete, SN. Go to Adjust, Noise, settings: Uniform and Monochrome selected setting 75. Add a drop shadow.
Repeat this step on layer 1. Delete layer 6 & 1.
Lets add our tube, select layer 2, S, SA, F, DF, c/p the close up and position over the selection, invert and delete.
Grey scale the tube layer (desaturate) and lower the opacity to about 66%.
c/p the smaller tube as a new layer, position the right add a drop shadow.
Now lets add the elements, I used the following elements:
ST-Boa @ 60%, rotate to lay across the bottom.
ST-Lips @25%
ST-Bottle @50%
ST-Polish @25%
ST-Lipstick @25%, Free rotate 90 Left.
ST-Condom @30% rotate to the right using deform tool, move to the right and below the main tube layer.
ST-Flower @75%
Add your text and © and your all done.
Thanks for trying my tut.


Saturday, December 31, 2011

Happy New Year Freebie

3:14 PM | Posted by

Happy New Year!
This tut assumes your have a Good working knowledge of PSP.

Kit: Ringing It In, designed by Wicked Princess you can download it here
Tube: BCA by Ismael Rac, even though it's a free tube you still need a Rac license to use this tube, you can download from here
Mask: By Vix, (431) 3rd one down on this page here
Template: by Aqua Rebel template 71 you can download from here

Fonts: Passions Conflict, it's a ROB font so I can't share.
Shadow: 2,2, 36, 6
Filters: Penta.com, Colour Dot, Lokas 3D Shadow, Use your favourite settings
PSP Filters used: None

sa-f-df-nl= Select All, Float, Defloat, New Raster Layer.
sa-f-df= Select All, Float, Defloat.
c/p= copy & paste
sa=select all
sn=select none

See finished tag for placement of tube/elements.

Let's begin.
Open your template, mask and tube in psp, duplicate your template and close the original.
In your template delete the following layers: 9 & 10.

Unhide the background layer so that you can see what you are doing, add a new layer, sa, c/p paper 9 into selections, sn, apply your mask layer and merge group.

Select Raster 1 layer, sa-f-df-nl, c/p paper 9 into selections, sn, hide template layer.

Select Raster 3 layer, apply PentaCom Colour Dot filter use spacing of 5.

Select Raster 5 layer, sa-f-df-nl, c/p paper8 into selections, sn, hide template layer, repeat this step for Copy of Raster 5 layer.
Stay on this layer

Let's add some elements!
C/p the Disco Ball as a new layer, resize 50%.


C/p City Scape as a new layer, resize 50%. Now you'll need to move the smaller rectangles so they are positioned just below the City Scape, see my tag.


C/p the Mask as a new layer resize 50% and position to the left.


C/p the Top Hat, resize 20%, make this your top layer and position to the right.


C/p the Champagne as a new layer, resize 50% position to the left.


C/p the Shoes, resize 25% position to the right.


Select the City Scape layer.


C/p your tube as a new layer, resize if needed.


Hide the background layer.

Add your copy right and text.
All done.
Sunday, December 25, 2011

Merry Christmas Free

1:10 PM | Posted by
Photobucket


Click on preview for larger image.




Merry Christmas
This tut assumes your have a Good working knowledge of PSP & Animation Shop.


Tube: Rainbow Coffi, you have to be a member to download but well worth the time and it's free. here
Go to Rainbow Coffi link and in the Christmas list download the following:
Snowmen, 4th tube down in the left column. Trees, Left column bottom pair of trees. Snow, Left column third one down.
Animated snow here,
I'm not sure who's the original maker of this animation but it's been around for a few years. If you know or are the designer of this animation please email me I'd love to give you credit.

Fonts: Sunshine Poppy you can download here
Shadow: 2,2, 36, 6

Let's begin.
Open a new image 600x250.
Create a linear gradient using the colors A9BAC7 for the foreground and DAE1E7 for the background.
Flood fill your image.





Copy/paste the cloud tube as new layer, resize 50%, position to the left of your image dulpicate and mirror image.





Open your Tree tube, using the Free Hand selection tool (point to point) select around the tree on the left, selections invert.
Copy/paste this as a new layer in your image, resize 40%, sharpen once, positon to the left, duplicate layer, image mirror.





Go back to your tree tube and invert selectons again, copy/paste the Left tree as a new layer, resize 50%, sharpen once. Move this layer to below the Left tree layer.





Open your snow men tube and grey scale, go to Adjust, Colour Balance, Manual Colour Correction, source colour=d3d3d3, target colour=DAE1E7.
Copy/paste the snowmen as a new layer, resize 50%, postion slightly to the left of your image.





Add a drop shadow to the snowmen and tree layers.





Select the top layer, add a new layer flood fill with colour 3B4D5B, select all, float, defloat, selections Modify contract by 3 pixels, hit delete, add drop shadow, this is your frame layer.





Add your copy and text I used the same colour as the frame for my text.





Now for animation!





Open the snow animation in Animation Shop (AS), Edit Select All, keep selected.





In PSP hide your text and frame layer, copy merged, paste into (AS) as a new animation, duplicate the Frame so that you have 10 frames total.





Select the snow animation, Edit Copy, click on your New animation go to Edit Propagate Paste and the Edit Paste into Selected Frame, Left click you mouse once.





Go back to PSP, hide all layers except for the text and frame layers, copy merged and paste it into AS as a new animation.
Duplicate the number of frames until you have 10 frames, Edit Select All, Edit Copy.





Activate the animation you made before and got to Edit Select All, Edit Propagate Paste, Edit Paste Into Selected Frame, Left click your mouse once, run your animation and if your happy save as a GIF.

All done.

Saturday, December 17, 2011

Evergreen Christmas PTU

4:36 PM | Posted by




Evergreen Christmas
This tut assumes your have a Good working knowledge of PSP.

Kit: Evergreen Christmas by me you can purchase my kit at any one of my stores or you an buy directly here for .99 cents.










Tube: by Elias Chatzoudis, you can purchase this tube here, please use a license when using this tube.
Mask: "Vix_BigMask001" by vix ou an download the mask here.
Template:"temp4jaskac" download this template (click on "Kacy & Jascie") at Creative Misfits

Fonts: Annabelle download here
Shadow: 2,2, 36, 6
Filters:DSB Bright Noise, or use your fav noise settings in PSP
PSP Filters used: Noise, Inner Bevel (for name)

sa-f-df-nl= Select All, Float, Defloat, New Raster Layer.
sa-f-df= Select All, Float, Defloat.
c/p= copy & paste
sa=select all
sn=select none

See finished tag for placement of tube/elements.

Let's begin.
Open your template, mask and tube in psp, duplicate your template and close the original.
In your template delete the top 5 layers.

Add a new layer and move it to the very bottom of your layer pallet.
sa, c/p paper 17 into selections, sn, apply your mask layer and merge group. Resize this layer 95%.

Select the dotted oval layer sa-f-df-nl, c/p paper 19 into selections, sn, apply DSB Bright noise use defult settings (or use Noise Filter settings 40, Gaussian and Monochrome checked). Delete the template layer.
Repeat this step for "Dotted Corner" & "Dotted Line" layers.

Select the Black Vert Rect layer, sa-f-df, c/p paper 16 as new layer, selections invert and hit delete, delete the template layer.
Apply DSB Bright Noise or PSP Noise filter same settings as before.
Repeat this step for "Black Hor Rect" layer.

Select White Vert Rect layer, sa-f-df-nl, c/p paper 18 into selections, sn, delete the template layer.
Repeat this for the White Oval & Sm White Rect layers.

Select the Red Oval Layer, sa-f-df c/p paper 17 as a new layer, selelctions invert and hit delete, delete the template layer.

Select the Red Vert Rect layer, sa-d-df-nl, make paper 3 your pattern in your colour pallet set your size to 25, angle at 0, flood fill inside the floating ants area, select none, delete template layer.

Select the Black Oval layer, sa-f-df, c/p paper16 as new layer, selections invert hit delete.

Select the Sm Red Rect layer, sa-f-df, c/p paper16 as new layer, selections invert hit delete.
Delete the template layer. Repeat this step for the Red Hor Rect layer.

Select Sm Black Rect layer, sa-f-df-nl, c/p paper15 into selections,sn, c/p full size tube as new layer position, invert selections and hit delete.
C/p tube again and position to the left, resize 75% and sharpen once.

Select White Hor Rect layer, sa-f-df, c/p paper 14 as a new layer, selections invert and hit delete, delete the template layer.

Now to add your elements, I used the following:
Merry Christmas 3 @75% sharpen once.
Tree 1 100%
Scatter 6 @ 90%, position above mask layer
Ribbon 1 @65%, position to the left duplicate and mirror
Scatter 3 @ 100%, position under the Merry Christmas and to the left, duplicate image and mirror.
Stocking 1 @ 35% and then 50%
Bauble 12 @25%
Bauble 10 @35%
Bauble 7 @ 40%
Bauble 2 @40%
Bow 7 @ 40%
Ribbon 7 @ 40% duplicate and resize 40%

For the name on your tags I used Annabelle font, foreground colour 26226, background colour D3DC4B.
Write your name size 72, and add a the following inner bevel:


Width=12


Smoothnes=20


Depth=4


Ambience=10


Shininess=0


Angle=315


Intensity=50


Elevation=30


Colour=D3DC4B



Add your copy right.
All done.

Sunday, December 4, 2011

Winter Time FTU

7:57 AM | Posted by
Winter Time


By request, thanks Laurie xoxo
This tut assumes your have a Good working knowledge of PSP.

Kit: Winter Time by Mago74 can be found here
Tube: Ismael Rac you can purchase here.
Mask:HorsePlay's Pasture mask 9 here
Template: None

Fonts: Respective Slanted you can download here
Shadow: 2,2, 36, 6
Filters: None
PSP Filters used: None

sa-f-df-nl= Select All, Float, Defloat, New Raster Layer.
sa-f-df= Select All, Float, Defloat.
c/p= copy & paste
sa=select all
sn=select none

See finished tag for placement of tube/elements.

Let's begin.
Open your tube in psp, I changed the colour of the sweater using colour manipulation. Source colour # C0C0C0, Target colour # A7030A.
Open Winter magic cluster frame 2, resize 25% all layers.
Add a new layer, sa.



Open paper 1 and resize to 800x800 pixels and sharpen once, copy and paste paper1 into selelctions in your cluster image, apply your mask, merge group.


Move this layer below the cluster frame layer.



Copy and paste tube close up as new layer, resize by 70%, duplicate and move the duplicate layer below the cluster frame layer.



On the orginal tube layer erase any part of the tube that overlaps the bottom of the frame.
Add a dropshadow (make sure that Shadow On New Layer is checked) to this layer.



You will see the shadow at the bottom of the top tube, use your erasor again to erase the shadow that is showing. On this shadow layer add another drop shadow, this time uncheck Shadow on new layer.



Open Circled wordart resize 25%, c/p as top layer on your cluster, use your erasor to erase any word art that is on top of the decorations at the bottom of the cluster.
Add your copy right and text.



For the stats I opened a new image 600x250 or 150x150 c/p one of the papers as a new layer, then c/p the finished tag as a new layer resizing & sharpening so that they fit the image nicely, added a border and an element or 2, then added my initial and I was done.








Santa Knows PTU

8:55 AM | Posted by

Santa Knows
This tut assumes your have a Good working knowledge of PSP.

Kit: A Beary Merry Christams by Diva's Designs you can purchase it here

Thanks Mandy for letting me use this gorgeous kit for this tut.
Tube: Elias Chatzoudis, I used different tubes, you can purchase here
Mask: None
Template: by DeesDesignsDepot you can download here

Fonts: of choice I used OoohBaby which is a Rob font.
Shadow: 2,2, 40, 10
Filters: DSB Bright Noise, EyeCandy 5 Gradient Glow
PSP Filters used: None

sa-f-df-nl= Select All, Float, Defloat, New Raster Layer.
sa-f-df= Select All, Float, Defloat.
c/p= copy & paste
sa=select all
sn=select none

See finished tag for placement of tube/elements.

Let's begin.
Open tube and template in psp, duplicate the template and close the original.
In the template delete the credits, Top Purple Circle and Top White Circle layers.


Select Large White Circle layer, sa-f-df-nl, c/p paper 8 into selections, sn, apply DSB Bright Noise settings 45-Mix, hide template layer.
Repeat the above step for the following layers, Dot N Dash, for all 3 purple rectangles and White Strip layer.

Duplicate Raster 1 Layer, on original Raster 1 layer go to Adjust Blur, Gaussian Blur, use 4 as your setting.

Select the Large Mauve Circle layer, sa-f-df-nl, c/p paper2 into selections, sn, hide template layer.

Select Purple Strip layer, sa-f-df-nl, c/p paper 7 into selections, sn, apply DSB Bright Noise same settings as before, hide template layer.
Repeat the above steps for Bottom Purple Circle layer.

Select the Mauve Left Rectangle layer, sa-f-df-nl, c/p paper 4 into selections, keep selected, c/p first tube as new layer, position, invert selections and hit delete, hide template layer.

Repeat these steps for each Mauve Rectangle using a different tube for each rectangle.

Select Bottom White Circle, sa-f-df-nl, c/p paper 9 into selections, sn, hide template layer.

Select Word Art layer, apply EyeCandy 5 Gradient Glow, I used the Subtle White Glow settings, set the Glow radius to 5, colour used #528713

Now for the elements, I used the following:
Bow 2 @ 40%, duplicate this layer and resize again 40% for over the wreath.
Wreath @ 35%
Bell Decoration @50%
Holly @ 15%

Add your copy right and text.
All done.

Saturday, November 19, 2011

Winters Chill PTU

6:09 PM | Posted by
Click on pic for close up look!
After almost a year I've finally made a kit. Taggers are gonna love this one. It's choke full of awesome elements over 80 of them. Snowflakes, splatters, trails, ribbons, bows, trees the list goes on, lol, I couldn't fit everything into the preview. 24 amazing papers (no overlays used for these babies), 5 glitter sheets (not your regular glitter sheets either) and as a bonus (early Christams present I guess)I've included the 5 styles (PS only) that I creted used to create some of the elements with.
I know you'll love this kit.
Get it on sale at:
http://www.scrappetizing.com/store/
http://www.twilightscraps.com/
http://www.lollipopsngumdrops.net/store/
Sunday, November 13, 2011

Let It Snow FTU

9:50 AM | Posted by

Let it Snow
This tut assumes your have a Good working knowledge of PSP.

Kit: by Wicked Princess Scraps, All It's Glory you can download it here
Tube: Ismael Rac, you can purchase this tube here
Mask: MC_Mask19 by Melissa'z Creationz, you can download it here
Template: MC_ChristmasTemp4 by Melissa'z Creationz, you can download it here

Fonts: Santa's Sleigh, you can download here
Shadow: 2,2, 36, 6
Filters: DSB Noise, Penta Com Color Dot,
PSP Filters used: None

sa-f-df-nl= Select All, Float, Defloat, New Raster Layer.
sa-f-df= Select All, Float, Defloat.
c/p= copy & paste
sa=select all
sn=select none

See finished tag for placement of tube/elements.

Let's begin.
Open your tube, template, and mask in PSP. Duplicate the template and close the original.


Before I started I changed the colour of the outfit worn by the tube (this is allowed) go to Adjust, Colour Balance, Manual Colour Correction, Source colour=1C1C1, Target Colour=7B9C45. You can also use the green outfir already supplied in the tube.


In the template delete the Credits layer.


Select the bottom layer in the template add a new layer, move to the bottom and flood fill white.


Add a new layer, sa, c/p pp7 into selelctions, sn.
Apply your mask and merge group, aplly DSB Bright Noise use settings 37-Mix.


Open pp1, go to Image Rotate, Free Rotate 90° Right, in the template select Raster 3 layer, sa-f-df, c/p pp1 as new layer, selections invert hit delete, sn.


Select Copy of Raster 3 Layer in the template, sa-f-df, c/p pp1 as new layer Image Mirror, selections invert and hit delete, sn.


Select Raster4 layer, sa-f-df-nl, flood fill this area with colour # 603A27, sn, delete template layer, apply PentaCom Color Dot use Value=55 and Distance=5 rest of the settings use default.
Repeat the above step for Copy of Raster 4 layer.


Select Raster 2 layer, sa-f-df-nl, c/p pp6 into selections, sn.


Select Bottom Merged Layer, (white frame) add DSB Bright Noise setting at 45-Mix.


Select next Merged layer up, (red squares) sa-f-df-nl, flood fill with 603A27.


Select the 3rd merged layer from the top (black frames) sa-f-df-nl, flood fill with colour # 362116, sn, delete template layer, apply PentaCom Color Dot use Value=59 and Distance=2 rest of the settings use default.


Select the top Merged layer (text) sa-f-df-nl, flood fill each letter with colour # 362116, you may have to zoom in a bit, sn, delete template layer.


Select Raster 2 layer again, sa-f-df, c/p tube as new layer, position inside selection invert delete, you will have to erase anything showing in the bottom square, move to below the White frame layer, lower the opacity to 48 .


C/P your tube as a new layer, Image Mirror & position to the right.


Time to add your elements, I used the following:
Pinecone @ 50%
Ribbon Tree @ 50%
Ribbon @ 40%
WoodSnowman @ 40%
MouseCone @ 30%
Citrus @100%, c/p as new layer, erase all but the 2 on the far right

Add your copy right and name.
For my name I used colour 362116 in foreground and colour E3D5AD in th background, add a simple inner bevel using te following settings:


Shape # 4
Width=20
Smoothness=50
Depth=47
Ambience=13
Shininess=50
Angle=0
Intensity=30Elevation=60
Colour # CBAE69

All done, thanks for trying my tut.

Gypsy Queen PTU

9:51 AM | Posted by

Gypsy Queen
This tut assumes your have a Good working knowledge of PSP.
Please remember to use license number when using a PTU tube.

Kit: Gypsy Queen by Baby Cakes Scraps you can purchase this gorgeous kit here
Tube: Rachel Anderson, you can purchase this tube at CDO
Mask: Vix_mask362 by Vix you can download here
Template: By Blissfully Beth you can download here, template packs are on the left of her page.

Fonts: Saginaw
Shadow: 2,2, 36, 6
Filters: DSB Bright Noise or a noise setting of your choice in PSP
PSP Filters used: Noise

sa-f-df-nl= Select All, Float, Defloat, New Raster Layer.
sa-f-df= Select All, Float, Defloat.
c/p= copy & paste
sa=select all
sn=select none

See finished tag for placement of tube/elements.

Let's begin.
Open your tube, mask and template in PSP, duplicate the template and close the original.

Delete the Credits & wordart layers.


Selectthe background layer and add a new layer, sa, c/p Cloudy paper into selections, sn, apply your mask and merge group.


Merge layers 1, 2, & 3
Sa-f-df, c/p Dark Blend Paper as new layer, invert selelctions and hit delete, delete the template layer.


Select Grey Rectangle Frame layer, sa-f-df, c/p Glitter Borader paper as new layer, selections invert, hit delete, keep selected.


C/P Raster 4 layer of your tube (if you're using the same tube), position to the left, hit delete. Add a dropshadow, lower the oppacity to 48.


C/PRaster 2 layer of your tube as a new layer, resize 80%, go to Sharpen, Unsharpen Mask, use these setting: Radius 1, Strength 35, clipping 4.
Add a drop shadow.


Select the Black Frame layer, sa-f-df-nl, c/p Glitter Paper into selelctions, sn.


Now to add your elements, I used the following:
Deep Purple Bow @ 40%, use your deform tool to push the ends of the ribbon to line up with the edge of the frame. Duplicate image and merge down.
Glittery Flower @ 40 %
Purple Lace @ 50% use the deform tool to push in the edges of the lace.
Golden Leaves @ 25%
Glitter Butterfly @ 25%
Lavender Flower @ 35%

Add your copy right and text.
All done.

Sunday, November 6, 2011

My Blue Christmas PTU

3:39 PM | Posted by

My Blue Christmas
This tut assumes your have a Good working knowledge of PSP.

Kit: My Blue Christmas by CuddleBees Designs you can purchase this kit at LollipopsNGumdrops.
This is a full sized kit so papers will have to be resized before using them.
Resize your papers to 800x800 pixels, elements should be resized 35% and sharpened once before following each step that involves an element from the kit.


Tube: Elias Chatzoudis pte-1663, you can purchase here
Mask: HorsePlay's Pasture Mask 19, you can download it here.
Template: by Designs by Vaybs, Vaybs_MisfitXmas5 you can download here near bottom of page.

Fonts: JellyK Delicious Cakes you can download here
Shadow: 2,2, 36, 6
Filters:
PSP Filters used: Noise filter

sa-f-df-nl= Select All, Float, Defloat, New Raster Layer.
sa-f-df= Select All, Float, Defloat.
c/p= copy & paste
sa=select all
sn=select none

See finished tag for placement of tube/elements.

Let's begin.
Open your tube, mask & template, duplicate the template and delete the credits & wordart layers.


Select the background layer and add a new layer, sa, (resize paper 800x800 pixels and sharpen once) c/p paper 6 into selections, sn, apply your mask and merge group.


Select Raster 1 layer, sa-f-df-nl, open paper 13 resize to 800x800 pixels, sharpen, c/p into selection on your new image, sn, add your favourite noise filter settings, I used Gaussian, Monochrome setting it at 45.


Open paper 10, resize 800x800 pixels.
In your template select Raster 2, go to Adjust, Hue & Saturation, settings at 0, sa-f-df, selections modify contract by 8.
Add a new layer, c/p paper 10 into selections, sn.


Repeat the above steps for the Raster 4 layer using paper 10.


Repeat again for rasters 3 and 5 using paper 7, remember to resize paper 7 first.
Select Raster 7, go to Adjust, Hue & Saturation settings at 0.


Select Raster 6, sa-f-df, c/p paper 10 as new layer, selections invert and hit delete, sn, hide your template layer for now.


Select Raster 8, sa-f-df-nl, c/p paper 8 into selections, sn.


Select Raster 9, go to Adjust, Hue & Saturation, settings at 0.


Select Raster 10, go to Adjust, Hue & Saturation, settings at 0.


While still in Raster 10, sa-f-df, selections modify contract by 8, add a new layer, c/p paper 10 into selections, sn.


Ok now you're ready to add your tube.
Select Raster 6 layer, sa-f-df, c/p the close up of your tube as a new layer, selections invert and hit delete, lower the opacity to 50.


C/P your tube as a new layer, positon.


Time to add your elements, I used the following:
Hanging Ornament @35% x2
Flower1 @35% x2
White Branch @ 35% x2, duplicate and mirror image.
Flower2 2 35% and then 50%


Add your copy right and text.
All done.

A Time To Remember PTU

8:21 AM | Posted by

A Time To Remember



This tut assumes your have a Good working knowledge of PSP.

Kit: Gemini Scraps, A Time To Remember, you can purchase this kit here


This is an absolutely stunning kit, a joy to work with, thank you Vicki
Tube: Anna Liwanag, you can purchase her tubes at PTE
Mask:Wee Scot Lass,WSL_Mask81, you can download here
Template:None

Fonts: JellyK Delicious Cakes you can download here
Shadow: 2,2, 36, 6
Filters: None
PSP Filters used: None

sa-f-df-nl= Select All, Float, Defloat, New Raster Layer.
sa-f-df= Select All, Float, Defloat.
c/p= copy & paste
sa=select all
sn=select none

See finished tag for placement of tube/elements.

Let's begin.
Open a new image 600x600 flood fill white.



Add a new layer, sa, c/p paper 02 into selelctons, sn.



Apply your mask and merge group.



C/P Frame 6 as new layer, resize 85%.



Using Magic Wand click inside Frame, selections modify, expand by 3 pixels.



C/P GreeneryPink1 as new layer, hit delete.


Move this layer below your Frame in the layers pallete, add a drop shadow.



Hi-lite Mask layer.



C/P Butterfly Cluster resize 60%, duplicate this layer, go to Image Mirror, layers merge down.



Using Magic Wand click inside Frame, selections modify, expand by 3 pixels, hit delete, sn.
Duplicate this layer and Image Flip, merge these 2 layers down, add a drop shadow.



Using Magic Wand click inside Frame, selections modify, expand by 3 pixels, c/p Clock as new layer position to the right, selections invert hit delete, lower the opacity to 38, sn, move this layer below the frame layer.



Using Magic Wand click inside Frame, selections modify, expand by 3 pixels, c/p close up of tube as new layer, selections invert hit delete, move this layer below the frame layer.



Add any other elements you wish, I used the following:
Folded Ribbon, use your deform tool to rotate to your liking.
KeyString @ 35%
Fabric Flower 04 @ 50%
Stitches, use your erasor tool, brush size 24 to erase the edges you don't want.
Bow 01 @ 50%, use your deform tool the rotate to your liking.
Fabric Flower 03 @20%

Add your copy right and text.
All done.

One Of A Kind PTU

6:38 AM | Posted by

One of a kind
This tut assumes your have a Good working knowledge of PSP.

Kit: By Tammy, TLP Designz, TLP_Blue Dreams, you can purchase this kit here.
You can visit Tammy's blog here
Tube: Olivia, you can purchase this tube at Creative Designs Outet.
Mask:HorsePlay's Pastre Mask 27 you can download here
Template:Missy_tagtemplate281 at Divine Intentionz, you can download here templates are listed on the left side of her page.

Fonts: Halida you can get it here
Shadow: 2,2, 36, 6
Filters: DSB Bright Noise
PSP Filters used: None

sa-f-df-nl= Select All, Float, Defloat, New Raster Layer.
sa-f-df= Select All, Float, Defloat.
c/p= copy & paste
sa=select all
sn=select none

See finished tag for placement of tube/elements.

Let's begin.

Open tube, mask and template in PSP.
Duplicate the template and close the original, delete the credits and shape layer.

Increase canvas size to 700x600. You can resize later.
Click on background layer flood fill blank area with white.

Add a new layer, sa, c/p paper 1 into selections, sn, apply your mask and merge group.

Select Glittered Oval layer, sa-f-df-nl, c/p paper 7 into selections, sn, apply DSB Bright Noise, setting 49-Mix, delete template layer.

Select Oval layer, sa-f-df, c/p paper 10 into as new layer, selections invert hit delete, sn, delete template layer.

Select Circle layer, sa-f-df-nl, c/p paper 10 into selections, sn, delete template layer.

Select Wordart layer, go to Adjust, Hue & Saturation settings at 0, go to Adjust, Colour Balance, Manual Color Correction, Source Color=0C0C0C, Target color=2A726C.
Repeat these steps for the Star 2 layer.

Add your elements, I used the following:
Fan @ 65%
Flower @40%
Bugs @30%
Folden ribbon @ 50%
Butterfly @30%
Bow @ 30% x2
Button @30%


Add your copy right and text.
All done.
Saturday, October 29, 2011

Sprial

5:11 PM | Posted by



Spiral
This tut was created by JTsDesigns. Any similarities to other tuts are coincidental.
Filters used in this tut: Krusty Vol.1 Generator B-1.
Tube by Keith Garvey available here.

Open a new image 600x600.
Apply Krusty Vol. 1 Generator B-1, change the Green% setting to 66.
Go to Effects, Edge Effects, Enhance.

Open a new image 600x250, select all, c/p the 600x600 image into selections, name this layer Back1.
Copy & paste your tube as a new layer and position to the left.
Add a new layer and flood fill with black, selections all, contract by 2 pixels hit delete.
Add your text and copy right.
Hide your Back 1 layer and Merge Visible.
You should now have only 2 layers.

Hide your tube layer, c/p the Back1 layer into Animation Shop (AS) as a new animation.
Edit paste as new animation again so that you have 2 copies of the Back1 image open.

Activate one of the Back1 Images and duplicate the frames so that you have 10 frames, minimize for now.

In the other Back1 images go to Effects, Insert Image Effect, from the drop down menu select Spiral.
Click on Customize and type in 5116 as the Maximum Angle, and Canvas Colour (black) is selected.
Click ok in the windows.
You should now have 13 frames.

Click on Frame # 4, hold down your shift key and click on frame #13, you should now have 10 frames hi-lited.
Go Edit, Copy.
Activate the other Back1 frame.
Go to Edit, Propogate Paste,
Edit, Select All,
Edit, Paste Into Selected Frame.
It's important that you do not move your mouse, just simply left click and it will center in your image.
This is your new animation, now lets get the tube layer to add on top.

Back to PSP.
Hide your Back1 layer, unhide your tube layer and select that layer, copy and paste as new animation in AS.
Duplicate this frame so that you have a total of 10 frames.
Go Edit, Select All
Edit, Copy.
Activate the New animation.
Go to Edit, Propogate Paste,
Edit, Select All,
Edit, Paste Into Selected Frame.
Hover the image over the first frame slightly to center the frame as it is a little smaller than the the Back1 frames for some reason, once satisfied with it's position left click once.
All done, save as a gif.

On The Veranda PTU

11:58 AM | Posted by

On The Veranda
This tut assumes your have a Good working knowledge of PSP.

Kit: On The Veranda by Butterfly Kisses Scraps you can purchase here
Tube: Barbara Jensen you can purchase this tube here
Mask: by me, JTsDesigns, you can get it here
Template: MC_Template33 from Melissa's Creationz you can download it here

Fonts: Saginaw
Shadow: 2,2, 36, 6
Filters: None
PSP Filters used: Gaussian Blur

sa-f-df-nl= Select All, Float, Defloat, New Raster Layer.
sa-f-df= Select All, Float, Defloat.
c/p= copy & paste
sa=select all
sn=select none

See finished tag for placement of tube/elements.

Let's begin.
I recoloured the tubes outfit to co-ordinate with the kit, this is allowed with this tube.


Open your tube, mask and template in PSP, duplicate the template and close the original.


In you template delete the following; credits, shapes and "perfect 10" layers.


Image canvas size 600x600 Center.

Unhide the Raster 1 layer and flood fill white, add a new layer, sa, c/p paper 2 into seletions, sn, duplicate this layer, on orginal layer go to Adjust, Gaussian Blur setting 38.61, resize this layer 95%

Select Large Circle layer, sa-f-df-nl, c/p paper 14 into selection, sn, delete the template layer.
Repeat the above step for the Rectangle Frame layer.

Select the Sm Circle layer, sa-f-df-nl, c/p paper 15 into selection, sn, delete the template layer.

Select the Double Squares layer, sa-f-df, c/p paper 2 as new layer, selections invert and hit delete.

Select the Rectangle Background layer, sa-f-df, c/p paper 6 as a new layer, selections invert and hit delete, keep selected.

C/P your tube as a new layer, position to the left, hit delete. Add a drop shadow, change the Blend Mode to Luminance Legacy.

C/P your tube again and move to the right, add a drop shadow.
You can now add your elements, I used the following:
Sparkle02 @ 100%
Ribbon01 @ 65%
Spill01 @ 45% then 65%
Ribbon03 65% then 65%
Flower02 @ 25%
Butterfly01 @ 20%

Add your copy right and text.
All done.

Sunday, October 23, 2011

Punk Rock Fun PTU

9:48 AM | Posted by

Punk Rock Fun!
This tut assumes your have a Good working knowledge of PSP.

Kit: Punk Rock Fun by AmyMarie you can purchase her kits here
Tube: VeryMany, EMOlution5, you can purchase here
Mask:WSL_Mask 81 which you can download here
Template: None

Fonts: P22 Corinthia, it's a pay font but any nice script font will do.
Shadow: 2,2, 36, 6
Filters:
PSP Filters used:

sa-f-df-nl= Select All, Float, Defloat, New Raster Layer.
sa-f-df= Select All, Float, Defloat.
c/p= copy & paste
sa=select all
sn=select none

See finished tag for placement of tube/elements.

Let's begin.
Open a new image 600x600 flood fill white.



Add a new layer, sa, c/p paper 11 into selelctions, sn, apply your mask and merge group.



C/P Glitter Splatter 2 as new layer, resize 90%, move down on your image,


duplicate Image Flip, layers merge down.



C/P Glitter Splatter 3 as new layer.



C/P Wireframe 1 as new layer resize 80%.



C/P the Glass Star Chain as a new layer, use magic wand click inside Wire frame, selection invert, on the star chain layer hit delete, sn, move this layer to just above the mask layer.



C/P your tube as a new layer.



Select your Frame layer and duplicate, move this above your tube layer in your layers pallet.
Use your erasor tool to erase top part of the frame that covers the head, select your tube layer and delete anything that is showing below the bottom of the frame.
Add a drop shaow to your tube and bottom frame layer.



Now to add your elements, I used the following:
Color Guitar 2 @ 80%
Devil Heart 2 @ 75%
Glass Star 1 @ 50%
Glass Brad 6 @ 12%

Add your copy right and text.
I added a gradient glow and shadow to my name but that's optional.
All done.


Wednesday, October 19, 2011

Hocus Pocus Life's A Witch PTU

5:18 AM | Posted by

Hocus Pocus Life's a Witch
This tut assumes your have a Good working knowledge of PSP.

Kit: Hocus Pocus by Le Paradis Du Scrap which you can purchase here.
Tube: Elias Chatzoudis which you can purchase here
Mask:Vix_Halloween2010No1 you can download this pack here
Template: by BlissfullyBeth, this is template pack101-110 ( packs are lised on the left of her blog) a great set of halloween templates you can get them here

Fonts:Jellyk Delicious Cakes you can download it here
Shadow: 2,2, 36, 6
Filters: DSB Bright Noise,
PSP Filters used: Noise,

sa-f-df-nl= Select All, Float, Defloat, New Raster Layer.
sa-f-df= Select All, Float, Defloat.
c/p= copy & paste
sa=select all
sn=select none

See finished tag for placement of tube/elements.

Let's begin.
Open the, mask and template in psp, duplicate the template and close the original.
In the template delete the credits and the Grey Rect Frame layers.
Starting at the bottom select the Raster 1 layer, add a new layer flood fill white, delete the Raster 1 layer.



Add a new layer, sa, c/p paper 11 as a new layer, apply your mask and merge group.
C/P E13 (eyes from the elements folder) as a new layer.



Select the Dotted Oval layer, sa-f-df-nl, c/p paper 2 into selelctions, sn, delete the template layer, apply DSB Bright Noise45-Mix or use your favourite noise settings in PSP.



Open paper 5 and make into your foreground pattern setting the Repeats at 0 and the scale at 10, select the Vert Black Line 2, sa-f-df, flood fill with the pattern, sn.
Repeat this step for the Vert Balck Line 1 layer.



Select the Orange Oval layer, sa-f-df-nl, c/p paper12 into slelctions, sn, delete the template layer.



Select the Black Half Circle layer, sa-f-df c/p paper 13 as a new layer, selelctions invert, hit delete, keep selected.
C/p your tube (layer 2 if you're using the same tube) as a new layer position over the half circle and hit delete, sn.



C/P the same tube again and place directly over the first tube, use your erasor to erase any overlap that you don't want showing.



Give this layer a deep drop shadow, I used 4, 4, 36,6 make sure "Shadow On New Layer" is checked.
Apply the same shadow on the New shadow layer and the again on the next shadow layer this will give the appearance of her popping out.
This is for the benefit of those of us out there that don't have Loka's Shadow lab lol.



I applied DSB Bright Noise to the "and then you fly" and Witch Orange layers.



Now for the elements, I used the following:
E1 @ 80%
E13 @ 8%
E15 @ 20%
E34, copy and paste as a new layer, use your erasor to erase overlap, set your erasor hardness to 0, use the mask layer as your guide.
Once your happy with the results grey scale the moon and lower the opacity to 94.
E9 @ 20%
E44 @ 20%


Add your copy right and text.
All done.


Sunday, October 16, 2011

Devilish Tease PTU

12:23 PM | Posted by

Devilish Tease
This tut assumes your have a Good working knowledge of PSP.

Kit: Devilish Tease by Angels Designz, you can purchase her kit here
Tube: Keith Garvey, you can purchase his tube here
Mask: by Horseplay's Pasture, mask 19, you can download from here
Template: by Horseplay's Pasture, template 131, you can download from here

Fonts: Quastic Kaps Line you can download it here
Shadow: 2,2, 36, 6
Filters: Xero, Porcelain (optional)
PSP Filters used: None

sa-f-df-nl= Select All, Float, Defloat, New Raster Layer.
sa-f-df= Select All, Float, Defloat.
c/p= copy & paste
sa=select all
sn=select none

See finished tag for placement of tube/elements.

Let's begin.
Open your tube/s, mask and template, duplicate the template and close the original.
In the template delete the following; Credit & Strip layers.

Select the back ground layer, add a new layer, sa, c/p paper 11 into selections, sn.
Apply your mask and merge group.

Select Circle 1 layer, sa-f-df, c/p paper 3 as new layer, selections invert, hit delete. Delete template layer.
Repeat this step for Circle 2 layer.



Select Back Right Rectangle, sa-f-df-nl, c/p paper 1 into selelctions,sn, delelte teplate layer.
Repeat this step for Back Left Rectangle layer.



Select Oval Back layer, sa-f-df, c/p paper 11 as new layer, selections invert, hit delete.


Delete template layer.



Select Oval layer, sa-f-df, c/p paper 4 as new layer, selections invert, hit delete, keep selelcted.
C/P close up of tube as new layer, hit delete, sn.


Change the blend mode to Soft Light.

Select the Top Rectangle, sa-f-df, c/p paper 9 as new layer, selection invert, hit delete, keep selections, c/p paper 5 as new layer, hit delete, keep selected, invert selelctions, modify, contract by 4 pixels, hit delete, sn.
Select the Top Rectangle, sa-f-df, c/p tube as new layer position, selelctions invert hit delete, apply Xero Porcelain filter using only the Red Channel set at 255 the others at 0.
Repeat the above steps for the Bottom rectangle.



C/P your tube as new layer.



You can now add the elements, I used the following:
Mask @ 50%
Razor @ 30%
Lips @ 30% then again @ 50%
Devil Heart @ 50%
Heart Chain @ 100%
Feather @ 80%, position to the left, duplicate and mirror.



Add your copy right and text.
All done.


Subscribe to: Posts (Atom)

Categories

BST Forum

Blogger Template created with Artisteer by .